Smashable Baseball Bat!
I had to reupload…Music problems *NEW CAULK MUG* www.zazzle.com Please Subscribe because it will help me alot! Twitter: www.twitter.com Blog: www.ParkersTutorials.tumblr.com Please become a fan on Facebook! The first step in this project is to take a big long sheet of Styrofoam and trace the basic shape of a baseball bat, using pencil. Then, Cut out the first shape, then trace it and cut it out. Repeat this process and you should have 3 cutouts of the bat shape. Once you have all three cut outs, glue them with lots of mod podge in-between the layers. Dont use hot glue, otherwise, your bat will be very unstable. After the glue is dry, take sandpaper and sand down the corners into a round shape. What were basically doing is making a square shape round. We do this by just sanding down to make the bat a cylinder shape. After you have everything sanded and the bat nice and round, take mod podge and seal the Styrofoam. After the Mod Podge is dry, paint the bat white, then let it dry, then, paint the bat a light brown. When the light brown paint is still wet, mix in some lines of dark brown paint. This will give it a realistic wood look. After the paint is dry, paint on a final layer of Mod Podge and let dry. For the bottom of the bat, I used an old wheel which I painted light brown and just hot glued on. After that, you are done! And now its time for the test film. Music Kevin MacLeod
Video Rating: 4 / 5
If you enjoyed this post, please consider to leave a comment or subscribe to the feed and get future articles delivered to your feed reader.
Comments
No comments yet.
Leave a comment